The first step was to figure out the best location for the Twisted Throttle Water Bottle and Mount. In the picture below, it is placed in the front center of the pannier. The bad part about this spot is the lid cannot be opened without taking off the water bottle. The best location is the right front corner (corner closest to the bike) of the pannier. In this position the water bottle is out of the way when the pannier is opened.



Two quarter inch holes were drilled.



Next was bolting the mount on to the pannier. Behind the mount two water resistant washers are used. I also put clear silicone on the bolts for extra protection (not sure if its going to help out or not).



The water bottle mount is bottled on.




Next the water bottle is placed in the mount.